Inhaltsverzeichnis Regulation No 74 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of category L 1 vehicles with regard to the installation of lighting and light-signalling devices (Regulation No 74 of the Economic Commission for Europe of the United Nations ... (42013X0618(02)))

Regulation No 74 of the Economic Commission for Europe of the United Nations ... (42013X0618(02))

EU - Rechtsakte: 11 External relations

Regulation No 74 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of category L 1 vehicles with regard to the installation of lighting and light-signalling devices

Regulation No 74 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of category L
1
vehicles with regard to the installation of lighting and light-signalling devices
1. SCOPE
2. DEFINITIONS
3. APPLICATION FOR APPROVAL
4. APPROVAL
5. GENERAL SPECIFICATIONS
5.12. Tell-tale lamps
5.13. Colours of the lights(3)
6. INDIVIDUAL SPECIFICATIONS
6.1. DRIVING BEAM HEADLAMP
6.1.1. Number
6.1.2. Arrangement
6.1.3. Position
6.1.3.1. Width
6.1.4. Geometric visibility
6.1.5. Orientation
6.1.7. Electrical connections
6.1.8. ‘Circuit-closed’ tell-tale
6.2. PASSING BEAM HEADLAMP
6.2.1. Number
6.2.2. Arrangement
6.2.3. Position
6.2.3.1. Width
6.2.4. Geometric visibility
6.2.5. Orientation
6.2.7. Electrical connections
6.2.8. Tell tale
6.3. FRONT POSITION LAMP
6.3.1. Number
6.3.2. Arrangement
6.3.3. Position
6.3.4. Geometric visibility
6.3.5. Orientation
6.3.6. Tell tale
6.3.7. Other requirements
6.4. FRONT RETRO-REFLECTOR, NON-TRIANGULAR
6.4.1. Number
6.4.2. Arrangement
6.4.3. Position
6.4.4. Geometric visibility
6.4.5. Orientation
6.4.6. Other requirements
6.5. SIDE RETRO-REFLECTOR, NON-TRIANGULAR
6.5.1. Number per side
6.5.2. Arrangement
6.5.3. Position
6.5.4. Geometric visibility
6.5.5. Orientation
6.6. PEDAL RETRO-REFLECTORS
6.6.1. Number
6.6.2. Arrangement
6.6.3. Other requirements
6.7. REAR RETRO-REFLECTOR, NON-TRIANGULAR
6.7.1. Number
6.7.2. Arrangement
6.7.3. Position
6.7.4. Geometric visibility
6.7.5. Orientation
6.8. DIRECTION-INDICATOR LAMP
6.8.1. Number
6.8.2. Arrangement
6.8.3. Position
6.8.4. Geometric visibility
6.8.5. Orientation
6.8.8. Electrical connections
6.8.9. Other requirements
6.8.11. Tell tale
6.9. STOP LAMP
6.9.1. Number
6.9.2. Arrangement
6.9.3. Position
6.9.4. Geometric visibility
6.9.5. Orientation
6.9.6. Electrical connections
6.9.7. Other requirements
6.9.8. Tell tale
6.10. REAR POSITION LAMP
6.10.1. Number
6.10.2. Arrangement
6.10.3. Position
6.10.4. Geometric visibility
6.10.5. Orientation
6.10.6. Tell tale
6.10.7. Other requirements
6.11. REAR-REGISTRATION-PLATE ILLUMINATING DEVICE
6.11.1. Number
6.11.6. Tell-tale
6.11.7. Other requirements
7. REGISTRATION OF VEHICLES
8. CONFORMITY OF PRODUCTION
9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
10. MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE WITH REGARD TO THE INSTALLATION OF LIGHTING AND LIGHT-SIGNALLING DEVICES
11. PRODUCTION DEFINITELY DISCONTINUED
12. TRANSITIONAL PROVISIONS
13. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS AND OF ADMINISTRATIVE DEPARTMENTS
ANNEX 1
COMMUNICATION
(maximum format: A4 (210 × 297 mm))
ANNEX 2
ARRANGEMENTS OF APPROVAL MARKS
MODEL A
(See paragraph 4.4 of this Regulation)
MODEL B
(See paragraph 4.5 of this Regulation)
ANNEX 3
LAMP SURFACES, AXIS AND CENTRE OF REFERENCE, AND ANGLES OF GEOMETRIC VISIBILITY
ILLUMINATING SURFACE IN COMPARISON WITH LIGHT-EMITTING SURFACE
(See paragraphs 2.9 and 2.8 of this Regulation)
SKETCH A
SKETCH B
ANNEX 4
FORWARD VISIBILITY OF RED LIGHTS AND REARWARD VISIBILITY OF WHITE LIGHTS
(See paragraph 5.9 of this Regulation)
Figure 1
Forward visibility of a red light
Figure 2
Rearward visibility of a white light
ANNEX 5
CONTROL OF CONFORMITY OF PRODUCTION
1. TESTS
1.1. Position of lamps
1.2. Visibility of lamps
1.3. Electrical connections and tell-tales

Feedback